Cobra Haz - T.A.T. (Hazardous - Tactical Assault Team) Officer continued..................

For the body armor, I used the chest and shoulder armor pieces from a 30th Anniversary Star Wars Clone Troop in training fatigues figure from 2007. I painted them flat black and then used a tiny drill bit and drilled the holes in them for simulated bullet holes and let the drill bit kind of hit the shoulder pieces to simulate battle damage scratches. Then after the holes were drilled, I painted the inside of the hole with flat black and then did the surrounding area around the holes in silver to simulate the armor breaking open and penetrated. The air breather mask is made from a 30th Anniversary Star Wars Clone Trooper Commander Vill helmet from the 2008 Target exclusive Order 66 set. I cut the lower section of the helmet out and painted it satin black with the red details and used rubber "tubes" from a screen window seal/gasket kit. I cut the rubber hoses to the desired length and glued them onto the mask. Then, glued the mask onto the troopers face. Once I put the rest of the figure back together, I glued the other ends of the hoses to the top of the body armor on the back where the ledge is after I dremeled out 2 small holes for them to go into. Using an Xacto knive, I sliced off the gun and holster on Tomax's right thigh and glued the holster from a H.I.S.S. driver's right thigh on inplace of it and put the gun in it. Then, I added a flesh wound on his right arm by using the dremel and taking a little bit of plastic off of his arm. Painted the new wound flesh color and then added the red for blood around the wound and down his leg and boots and on the stand too.

Custom Cobra Haz - T.A.T. (Hazardous - Tactical Assault Team) Officer "recipe"

Head, Helmet, Torso, Arms/Hands, Lower Legs - Night Watch Officer (2008 25th Anniversary Toys 'R Us exclusive Night Watch 5-pack set)

Upper Legs - Tomax (2008 25th Anniversary Comic Pack, Wave 3 {Tomax/Xamot})

Body Armor/Shoulder Armor - Clone Trooper in Training Fatigues (Episode II Style) (2007 30th Anniversary Star Wars single carded figures)

Air Breather Mask - Commander Vill helmet (2008 30th Anniversary Star Wars Target exclusive Order 66 set {Emperor & Commander Vill})

Hoses for Air Breather Mask - Rubber screen window gasket/seal repair kit (Menards, Home Depot, Lowes, etc.)

Large Rifle with Scope and Silencer - Marauder's Gun Runners

Uzi - Snake Eyes (2007 25th Anniversary G.I.Joe Box Set)

Silencer for Uzi - Marauder's Gun Runners

Grenades on belt - Viper (2008 25th Anniversary single carded figures, Wave 7)

Leg Holster and Gun - H.I.S.S. Driver (2008 25th Anniversary single carded figures, Wave 7)

Paints used:

Flat black Spray Paint

Tamiya X-1 (Gloss Black)

Tamiya X-7 (Red)

Tamiya X-11 (Chrome Silver)

Tamiya XF-19 (Sky Grey)

Tamiya XF-15 (Flat Flesh)